Description
Hand forged 16″ pintel gate hinge. Made from 2″ steel bar with scroll end details (3-1/2″ at widest). Has 3 mounting holes (3/8″) at 3″, 8″ and 13″ from end. I recommend using 3/8″ carriage bolts to mount hinges onto gate (not included, purchase the length you need at your local hardware store). These hinges are specifically made to sit more in the centre of the gate stile so are mounted on the front or back of the gate with the pintel hole in line with the wood (not facing away from gate as many gates are set up to open only one way), this allows the gate to open both directions if desired. Please check out our video on installing hinges HERE. These hinges work best with gates from 4′-8′ wide (for smaller gates see our 12″ hinges). I like to use 3/4″ pintel carraige bolts on the posts with my driveway gates, they are more heavy duty and easier to finely adjust after the gate is hung, You will need either 3/4″ pintel lag bolts or 3/4″ pintel carriage bolts to install on your post which the hinges will sit on, we sell those (see below) or purchase at your local hardware store.
* Ships in 1-3 weeks
